Description
Floor convectors of heating "VITRON" with natural convection are heating devices in which the copper-aluminum heat exchanger is installed. Heat is transferred to a heated room by natural convection.Floor convectors of heating "VITRON" with natural convection are heating devices in which the copper-aluminum heat exchanger is installed. Heat is transferred to a heated room by natural convection.
Allows to block the flow of cold air from the glazed facades or windows.
This convector is used for heating residential, public and administrative buildings, including children's institutions, exhibition halls, cottages and offices. Can be installed in both single-pipe and two-pipe heating systems.
It is recommended to use only in pumping heating systems.
Convector data
- the maximum operating temperature of the coolant: 95 ° С;
- the maximum operating temperature of the coolant: 95 ° С;
- operating pressure of the coolant: 16 atm (1.6 MPa);Test pressure: 25 atm (2.5 MPa).
Floor convectors are ideal as the main type of heating in buildings with a high heat demand, where there is no possibility or desire to install appliances in the floor screed.
A wide range of models will allow you to choose a convector that clearly corresponds to the heating project, and the color variants of powder coatings and various types of perforation of the steel casing will allow this device to be entered into any interior.
VITRON floor water convectors consist of a steel casing with a steel thickness of 1.5 mm, in which perforation is made for air convection (we perform such types of perforations as: longitudinal and transverse slits, circles, squares, crosses, etc.).
Inside the casing is a patented copper-aluminum heat exchanger, the same as in the models of convectors built into the floor.
The casing has a cutout for installing the thermal ventilator or thermal head. And thanks to removable fixing and adjusting legs, the device is mounted easily and quickly.
Contents of delivery
- casing made of galvanized steel powder coated;
- casing made of galvanized steel powder coated;
- set of installation feet;copper-aluminum heat exchanger (copper tube diameter 15 mm);
- mounting bracket;attachment plate;
- fasteners (bolt M6 × 12, nut M6)
- technical passport, installation and operation manual;
Design features
- casing material-galvanized steel with a thickness of 1.5 mm, covered with a wear-resistant powder coating (standard coating color-matt black, white glossy);
- casing material-galvanized steel with a thickness of 1.5 mm, covered with a wear-resistant powder coating (standard coating color-matt black, white glossy);
- mounting feet and mounting bracket is made of steel with a thickness of 2.0 mm;connection of heat exchanger - G1 / 2 "(internal thread);
- the use of materials with increased heat transfer properties (Cu, Al, Aluminum) and resistant to corrosion;removable copper-aluminum heat exchanger, covered with wear-resistant powder coating (coating color: painted in the color of the housing);
- Convectors are made only of terminal modification
